Yum Foam

Yum Foam is a pH-neutral foaming pre-wash shampoo designed to blanket the vehicle before the contact wash stage. It helps loosen dirt, road film, and grime so you can rinse away as much contamination as possible before touching the paint.

The formula is built with a high raw-material content for strong cleaning performance while maintaining a pH level of 7. That means Yum Foam can be used over existing waxes, sealants, and ceramic coatings without stripping or compromising the protection when used as directed.

Yum Foam also rinses clean without reactivating during the rinse process, helping you move from pre-wash to contact wash without extra rinse passes. Use it through a foam cannon for maintenance washes, coated vehicles, protected daily drivers, and exterior details where you want a safer wash process from the start.

Key Benefits:

• pH-neutral foaming pre-wash shampoo
• Creates a foam blanket before the contact wash stage
• Helps loosen dirt, road film, and grime before touching the paint
• pH 7 formula helps preserve waxes, sealants, and ceramic coatings
• Rinses clean without reactivating during the rinse process
• Safe for paint, engine bays, tires, trim, rims, and alloy wheels when used as directed
• Useful for maintenance washes and protected vehicles
• Pairs well with a citrus pre-wash on lower panels and heavier contamination
• Works best through a quality foam cannon
• Strong first step before shampoo washing with clean wash media

How to Use:

1. Rinse the vehicle first to remove loose dirt and grit.
2. For dirtier lower sections, use a citrus pre-wash first when needed.
3. Add 100ml to 150ml of Yum Foam into a foam cannon bottle.
4. Fill the remainder of the bottle with water.
5. Foam the entire vehicle from top to bottom.
6. Allow the foam to dwell for 5 to 10 minutes without drying on the surface.
7. Rinse thoroughly from top to bottom.
8. Continue with your contact wash using shampoo and clean wash media.

Best Used For:

• Foam cannon pre-wash
• Maintenance washes
• Protected vehicles
• Coated vehicles
• Daily drivers with light to moderate dirt
• Paint, trim, tires, rims, alloy wheels, and engine bay areas
• Reducing loose contamination before contact washing

Important Notes:

• Use on cool surfaces only.
• Do not allow the foam to dry on the vehicle.
• Rinse thoroughly before beginning the contact wash.
• For heavier grime, bugs, and lower-panel dirt, use a suitable citrus pre-wash before foaming.
• Always test first on sensitive, custom, damaged, or unknown finishes.

Specs:

• Product: Yum Foam
• Brand: YumCars
• Product Type: Foaming pre-wash shampoo
• Formula: pH neutral, pH 7
• Application: Foam cannon pre-wash
• Recommended Foam Cannon Use: 100ml to 150ml product, then fill the rest with water
• Dwell Time: 5 to 10 minutes
• Suitable Surfaces: Paint, engine bays, tires, trim, rims, and alloy wheels
• Protection Compatibility: Waxes, sealants, and ceramic coatings when used as directed
• Use Method: Foam, dwell, rinse, then contact wash

Pro Tip:

Use Yum Foam after your initial rinse and before the contact wash. On dirtier vehicles, treat the lower panels first with a citrus pre-wash, then blanket the vehicle with foam and let it dwell while staying wet.

Goes Great With:

• TDS Foam Cannon Pro V2.0
• TDS Foam Cannon Pro V2.0 Single
• TDS Wash Mitt
• TDS 1400 GSM Hybrid Microfiber Towel
• TDS 1600 GSM Twisted Loop Drying Towel - Green
• Yum Reset 3-in-1 Acidic Shampoo
• Yum Wheel Foam

You Are Fueling A Community:
Every order fuels the That Detail community. Join the conversation in That Detail Group and tag us on Instagram, TikTok, Facebook, YouTube, Threads, and X to show your work and get featured.