TDS Apex Foam Cannon

A foam cannon should do more than make thick foam. It should help you apply product efficiently, stay upright, pull soap consistently, adjust easily, and hold up through repeated use. The TDS Apex Foam Cannon brings those details together in one complete, ready-to-use setup.

At the center of Apex is our three-part foam filter, built with 304 stainless steel components and a dense foam filtration element. This upgraded design helps Apex produce thick, clinging foam while still allowing smooth, consistent soap-and-water mixing and reliable operation through the cannon.

Apex is also built around accurate, repeatable chemical application. The 1-liter bottle features a precision-marked view window with accurate measurement markings, making it easier to repeat proven mixtures, track product use, or calculate Panel Impact Ratio (PIR) with your specific pressure washer and chemical setup.

A 1.1 mm stainless steel orifice comes preinstalled for many consumer electric and lower-flow pressure washers, while an additional 1.25 mm stainless steel orifice is included for higher-flow machines. The wide-mouth HDPE bottle has a broad, stable base, while the platinum-cured silicone intake tube with weighted pickup helps maintain chemical draw as the bottle is tilted or the product level gets low.

Key Features:

• Three-part foam filtration system with 304 stainless steel components
• Dense foam filter helps produce thick, clinging foam while maintaining smooth soap-and-water mixing
• Precision-marked view window for accurate, repeatable chemical mixtures
• Useful for detailers measuring product consumption or calculating Panel Impact Ratio (PIR)
• 1.1 mm stainless steel orifice preinstalled with 1.25 mm option included
• 1-liter wide-mouth HDPE bottle with broad, stable base
• Platinum-cured silicone intake tube with weighted pickup
• Adjustable chemical draw and narrow-to-wide rotating fan pattern
• Standard 1/4-inch stainless steel quick-connect fitting

Choosing the Correct Orifice:

• 1.1 mm: Preinstalled and generally recommended for many consumer electric or lower-flow pressure washers
• 1.25 mm: Included for machines that operate better with a larger opening and greater water flow

Foam output and chemical delivery will vary based on pressure-washer flow, water quality, shampoo, dilution, and cannon adjustment. If your machine pulses, struggles, or appears restricted with the 1.1 mm orifice, switch to the included 1.25 mm option and follow your pressure washer manufacturer's operating requirements.

How to Use:

• Add automotive shampoo according to the chemical manufacturer's recommended dilution or your preferred tested mixture
• Use the marked view window to accurately measure product and water
• Add water slowly, then secure the foam cannon head to the bottle
• Connect Apex to a compatible 1/4-inch pressure-washer quick-connect system
• Adjust the top knob to control chemical draw
• Rotate and adjust the front nozzle for the desired fan width and orientation
• Apply foam evenly and allow it to dwell without drying on the surface
• Rinse thoroughly before beginning the contact wash

Care and Maintenance:

• Empty and rinse the bottle, intake tube, and weighted pickup after use
• Run clean water through the cannon to flush remaining soap from the internal system
• Periodically inspect the filter, orifice, one-way valve, O-rings, and pickup assembly for buildup or wear
• Store the cannon clean, drained, and protected from freezing temperatures

What's Included:

• 1 x TDS Apex Foam Cannon head
• 1 x 1-liter wide-mouth HDPE bottle with precision measurement window
• 1 x Platinum-cured silicone intake tube with weighted pickup
• 1 x Three-part foam filtration system
• 1 x 1.1 mm stainless steel orifice, preinstalled
• 1 x 1.25 mm stainless steel orifice
• 1 x Traditional stainless steel mesh filter
• 2 x Replacement one-way valves
• 1 x Stainless steel quick-connect fitting
• 1 x TDS sticker

Specs:

• Product: TDS Apex Foam Cannon
• Brand: That Detail Shop
• Bottle Capacity: 1 liter
• Bottle Material: HDPE #2 plastic
• Connection: Standard 1/4-inch pressure-washer quick connect
• SKU: TDS-FC-APEX-V1
• Pressure washer required

Warranty:

• 365-day limited warranty for consumer use
• 6-month limited warranty for professional use of five or more vehicles per week
• 30-day money-back guarantee

Goes Great With:

Build out the rest of your wash with the TDS Wash Mitt for the contact-wash stage, the TDS 1600 GSM Twisted Loop Drying Towel for high-absorption drying, and the TDS Hose Guide to help keep your pressure-washer hose away from tires and make moving around the vehicle easier.

You Are Fueling A Community:
Every order fuels the That Detail community. Join the conversation in That Detail Group to share your setup, get feedback, and connect with other passionate detailers. Tag us on Instagram, TikTok, Facebook, YouTube, and X to show off your results and get featured!