Tilted 360 Spray Bottle Adapter

Standard spray bottles work fine until the bottle is tilted and the pickup tube starts pulling air. The Tilted Spray Co. 360 Adapter is a simple weighted dip tube upgrade that helps compatible spray bottles keep spraying when you work at an angle.

Instead of relying on a stiff dip tube that only reaches the bottom of the bottle when it is upright, the Tilted adapter uses a flexible weighted tube that follows the liquid as the bottle moves. That means smoother spraying when you are reaching into wheel wells, cleaning door jambs, working around lower panels, spraying glass edges, wiping interior footwells, or using a bottle that is no longer full.

The idea is simple, but the workflow improvement is real. When the tube stays submerged, the sprayer is less likely to lose prime, dry pull, or leave usable product trapped at the bottom of the bottle. For detailers, cleaners, tint shops, PPF installers, and anyone who uses spray bottles all day, that can make the bottle feel less frustrating and more efficient.

Video:

Watch the Tilted Spray Co. 360 adapter concept in action below.

Key Benefits:

• Weighted dip tube adapter helps compatible spray bottles spray from more angles
• Flexible tube follows the liquid so the pickup end stays submerged more consistently
• Helps reduce dry pulls, lost prime, repeated trigger pumping, and wasted product
• Useful for auto detailing products, glass cleaners, all-purpose cleaners, degreasers, disinfectants, PPF slip solutions, tint work, and general cleaning
• Standard Tilted 360 adapter is designed for full-angle spraying when used with compatible liquids and sprayers
• Acid-resistant version is available for harsher chemical use, with side-to-side spray performance rather than full upside-down 360° movement
• Reusable design can be moved into another compatible sprayer when a trigger head wears out
• Backed by Tilted Spray Co.'s 365-day warranty when purchased and used according to their warranty terms

Goes Great With:

Pair the Tilted Spray Co. 360 Adapter with the TDS 400 UT Edgeless Microfiber Utility Towel for general detailing work, the TDS Wheel Brush for wheel cleaning after spraying, and the TDS 360 Spray Bottle Kit if you want a complete That Detail Shop bottle and sprayer setup.

How to Install:

1. Unscrew the sprayer head from the bottle and remove the original rigid dip tube.
2. Push the Tilted adapter tube firmly onto the sprayer's dip tube connection.
3. Place the sprayer back into the bottle and make sure the weighted end can move freely.
4. Trim the tube carefully if needed so it fits the bottle without binding or kinking.
5. Fill the bottle with a compatible liquid and test upright first, then test at an angle.

Compatibility:

Tilted Spray Co. designs the adapter to work with many common 28/400 and 28/410 sprayers, but fitment can vary by bottle and trigger design. Some sprayers may need a short piece of the original tube used as a connector. Always test fitment and chemical compatibility before full use.

Standard vs. Acid-Resistant:

• Standard 360 Adapter: Best for typical cleaners, detailing products, glass cleaners, disinfectants, degreasers, and general spray bottle use. Not recommended for acids, bleach, solvents, or adhesive removers.
• Acid-Resistant Adapter: Built for harsher chemicals such as wheel acids, acid-based cleaners, bleach-compatible use, and stronger industrial chemicals. It is stiffer and designed for side-to-side spraying rather than full upside-down 360° spraying.

What's Included:

• Tilted Spray Co. weighted dip tube adapters
• Quick-start installation information
• Retention ties or clips, depending on the kit version
• Sticker or supporting insert, depending on the kit version

Specs:

• Brand: Tilted Spray Co.
• Product Type: Spray bottle adapter / weighted dip tube
• Use Case: Angled spraying, bottle pickup improvement, product waste reduction, and sprayer upgrade
• Common Fitment: Many 28/400 and 28/410 sprayers
• Best For: Detailers, cleaners, tint shops, PPF installers, mobile setups, and shop spray bottle organization

Important:

Always choose the correct version for the chemical being used. The standard 360 adapter is not intended for acids, bleach, solvents, adhesive removers, or other incompatible chemicals. For harsh chemicals, use the acid-resistant version and follow Tilted Spray Co.'s instructions. Confirm fitment before relying on the adapter in a work setup.

You Are Fueling A Community:
Every order fuels the That Detail community. Join the conversation in That Detail Group to share your setup, get feedback, and connect with other passionate detailers. Tag us on Instagram, TikTok, Facebook, YouTube, Threads, and X to show your work and get featured across our social platforms.