Trending searches
Cart
Cart
Menzerna rates Super Heavy Cut 300 at cut/gloss 10/6 and Heavy Cut 400 at 8/8. The 300 prioritizes heavier correction; the 400 balances cutting with more gloss development. These are manufacturer comparison ratings. Choose with a test spot, the paint’s condition and a suitable pad rather than assuming the highest cut is always needed.
Menzerna describes the current 300 formula as capable of removing P1200 sanding marks. Its 400 technical sheet specifies P1500 with lambswool and P2000 with a pad. These figures depend on the specified process and are not a guarantee for every finish. Assess paint thickness, test the combination and follow the current product instructions.
It can cut and develop gloss in one process, but the result depends on the paint, pad and defects. Menzerna specifically allows for a second stage with 400 or a finishing polish when the surface requires it. Wipe away residue and inspect the paint before deciding the correction is finished.
Menzerna provides both rotary and orbital machine guidance for 300 and 400. Choose a machine-compatible cutting pad; the manufacturer lists heavy-cut foam and appropriate wool options. Use the instructions for your exact machine, pad and compound, since rotary and orbital speed settings are not interchangeable.
Inspect the test area after removing compound residue. If haze, polishing marks or insufficient gloss remain, add a refining step with an appropriate finishing polish and pad. Menzerna positions 300 as a heavy-cut stage and recommends a finish product when a higher-gloss result is required.
Subscribe to our newsletter
To push detailing culture forward with better products, honest value, and a community that actually gives a damn.
!